|Design of Gating System for Main Gear Box Housing|
|V U Sankpal, S S Shinge, B A Pawara, S P Ghanawat, S R Parit, S M Ingale|
|Cite This Article:|
Design of Gating System for Main Gear Box Housing, International Journal of Innovative Research in Technology(www.ijirt.org) ,ISSN: 2349-6002 ,Volume 5 ,Issue 11 ,Page(s):244-247 ,April 2019 ,Available :IJIRT147901_PAPER.pdf
|Design, Feeding System, Quality Casting, Yield|
|Metal casting is the process of obtaining the product by pouring molten metal into the mold. The number of process parameters must be strictly monitored and controlled to produce the casting on demand. After the analysis she found that the design of the gating system, the feeding system, the orientation of the casting in the mould and the position of the dividing line play an important role in the production of high quality castings. In this paper we have presented the particularities of good mould and gating system design. We also tried to standardize the design of the casting system according to the type of casting. It is noted that the art of designing the gating system in conjunction with scientific procedures minimizes the number of studies, reduces the rejection and improves the yield|
|Unique Paper ID: 147901|
Publication Volume & Issue: Volume 5, Issue 11
Page(s): 244 - 247
|Article Preview & Download|
DESIGN AND EXPERIMENTAL METHOD OF QUASI-RESONANT C...
Paper ID : IJIRT148806
Experimental investigation on strength properties ...
Paper ID : IJIRT148804
Virtual Instrumentation: An oscilloscope based on ...
Paper ID : IJIRT148798
Heat Transfer Augmentation Using Twisted Tape Inse...
Paper ID : IJIRT148786
SOFTWARE ARCHITECTURAL STYLES IN THE INTERNET OF T...
Paper ID : IJIRT148785