|DESIGN AND EXPERIMENTAL METHOD OF QUASI-RESONANT CURRENT-FED CONVERTER WITH MINIMUM SWITCHING|
|Cite This Article:|
DESIGN AND EXPERIMENTAL METHOD OF QUASI-RESONANT CURRENT-FED CONVERTER WITH MINIMUM SWITCHING, International Journal of Innovative Research in Technology(www.ijirt.org) ,ISSN: 2349-6002 ,Volume 6 ,Issue 6 ,Page(s):155-158 ,November 2019 ,Available :IJIRT148806_PAPER.pdf
|A quasi-resonant dc–dc converter with high voltage gain and low current stresses on switches is proposed. This converter preserved inherent advantages of current-fed structures, for instance, zero magnetizing dc offset, low input ripple, and low transformer turn ratio. Moreover, by employing the active-clamp circuit, the voltage spikes across the main switch, due to the existence of leakage inductance of the isolating transformer, is absorbed, and switches work in zero voltage switching. Since quasi-resonant switching strategy is employed, turn-off current (TOC) and losses of switches are considerably reduced. Because of zero current switching (ZCS), reverse recovery problem of diodes is alleviated. Experimental results on a 150-W prototype are provide to validate the proposed concept|
|Unique Paper ID: 148806|
Publication Volume & Issue: Volume 6, Issue 6
Page(s): 155 - 158
|Article Preview & Download|
Review Paper on Power System Blackout: A Serious I...
Paper ID : IJIRT148853
Function Overloading Implementation in C++...
Paper ID : IJIRT148851
EXPERIMENTAL INVESTIGATION OF AIR SWIRL TECHNIQUE ...
Paper ID : IJIRT148850
ANALYSIS OF NEWTON RAPHSON METHOD...
Paper ID : IJIRT148847
DESIGN OF A MONITORING SYSTEM FOR WASTE MANAGEMENT...
Paper ID : IJIRT148846