|FABRICATION AND MECHANICAL CHARACTERISATION OF EPOXY REINFORCED SISAL FIBRE COMPOSITE|
|Mr:RUPPA SAGAR, K.NANAJI, S.SAI KRISHNA, B.GURUVARDAN GANESH, V.JAGADEESH, K.HARISH|
|Cite This Article:|
FABRICATION AND MECHANICAL CHARACTERISATION OF EPOXY REINFORCED SISAL FIBRE COMPOSITE, International Journal of Innovative Research in Technology(www.ijirt.org) ,ISSN: 2349-6002 ,Volume 5 ,Issue 10 ,Page(s):133-135 ,March 2019 ,Available :IJIRT147671_PAPER.pdf
|Sisal fiber composite, Polymer Matrix Composite, Mechanical Characterization of Epoxy and Sisal fiber Composite.|
|Various samples have been fabricated by varying volume fraction of fibre (25%,50%,75%) using hand layup technique of thickness 6mm and 8mm correspondingly tests such as Rockwell hardness and Charpy impact are conducted and it has been found that high hardness number of 144.3 is obtained for 75% volume of fibre compared to that of 25% and 50% for 8 mm thick specimen, and high hardness number of 121.66 is obtained for 75% volume of fibre of 10mm thick specimen when compared to 25%and 50% and high impact strength of 140j is obtained for 25% volume fiber compared to 50%and 75% for 8mm thick specimen and 80j is obtained for 25% volume fibre compared to 50% and 75% for 10 mm thick specimen.|
|Unique Paper ID: 147671|
Publication Volume & Issue: Volume 5, Issue 10
Page(s): 133 - 135
|Article Preview & Download|
DESIGN AND EXPERIMENTAL METHOD OF QUASI-RESONANT C...
Paper ID : IJIRT148806
Experimental investigation on strength properties ...
Paper ID : IJIRT148804
Virtual Instrumentation: An oscilloscope based on ...
Paper ID : IJIRT148798
Heat Transfer Augmentation Using Twisted Tape Inse...
Paper ID : IJIRT148786
SOFTWARE ARCHITECTURAL STYLES IN THE INTERNET OF T...
Paper ID : IJIRT148785