|Analysis of wear behavior of Carbide Insert|
|Ketan Toke, A. V. Patil|
|Cite This Article:|
Analysis of wear behavior of Carbide Insert, International Journal of Innovative Research in Technology(www.ijirt.org) ,ISSN: 2349-6002 ,Volume 5 ,Issue 11 ,Page(s):284-287 ,April 2019 ,Available :IJIRT147910_PAPER.pdf
|Material removal rate, Tool nose wear, Turning, Difficult to machine material, Carbide tool|
|In this paper the effect of input parameters such as spindle rotation, feed rate and depth of cut on material removal rate and tool nose wear of machined components which were taken as the output parameters were analyzed during turning process. It is observed as the spindle rotation, feed rate and depth of cut increased material removal rate increases. When these parameters are varied the circumferential length of material encountering the tool work interface and cutting force increases that resulted in increased material removal rate. The effect of these process parameters on tool nose wear is also analyzed. Among the process parameters spindle rotation is having significant effect on tool nose wear compared to feed rate and depth of cut.|
|Unique Paper ID: 147910|
Publication Volume & Issue: Volume 5, Issue 11
Page(s): 284 - 287
|Article Preview & Download|
STRUCTURAL AND GEOMORPHOLOGICAL EVOLUTION OF THE A...
Paper ID : IJIRT148947
HYDROGEOCHEMICAL STUDIES OF ERRIMULLIVAGU BASIN, R...
Paper ID : IJIRT148946
Banded Magnetite Quartzite in Southern Granulite T...
Paper ID : IJIRT148945
MODELLING OF RENEWABLE ENERGY SOURCE FED ACTIVE BU...
Paper ID : IJIRT148944
Eco-friendly & Free Cooling Obtained by Thermoacou...
Paper ID : IJIRT148943