Proposed Nine-Switch Ac/Ac Converter Fed Three Phase Induction Motor with Volts per Hertz Control

  • Unique Paper ID: 144824
  • Volume: 4
  • Issue: 5
  • PageNo: 18-23
  • Abstract:
  • In this project presents design and analysis of a three phase induction motor drive using proposed nine-switch ac/ac converter with volts per hertz (V/F) in closed loop using PIC16F877 as a controller. A nine-switch converter having two-set of output terminals was recently proposed in place of traditional back to back converter that uses twelve switches in total. This converter features sinusoidal inputs and outputs, unity power factor and more importantly, low manufacturing cost due to its reduced number of active switches. A PIC16F877 microcontroller is a 16bit high performance digital signal controller. A 1HP, 3 phases, 415 V, 50 HZ induction motor is used as load for the converter. PC Lab view 8.2 is used to record and analyze the various waveforms. The experimental result for V/F control of three phase induction motor using PIC16F877 chip clearly shows constant volts per hertz and converter output voltage.

Copyright & License

Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

BibTeX

@article{144824,
        author = {S.Muthu Kumar  and P.Prabakaran},
        title = {Proposed Nine-Switch Ac/Ac Converter Fed Three Phase Induction Motor with Volts per Hertz Control},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {5},
        pages = {18-23},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=144824},
        abstract = {In this project presents design and analysis of a three phase induction motor drive using proposed nine-switch ac/ac converter with volts per hertz (V/F) in closed loop using PIC16F877 as a controller. A nine-switch converter having two-set of output terminals was recently proposed in place of traditional back to back converter that uses twelve switches in total. This converter features sinusoidal inputs and outputs, unity power factor and more importantly, low manufacturing cost due to its reduced number of active switches. A PIC16F877 microcontroller is a 16bit high performance digital signal controller. A 1HP, 3 phases, 415 V, 50 HZ induction motor is used as load for the converter. PC Lab view 8.2 is used to record and analyze the various waveforms. The experimental result for V/F control of three phase induction motor using PIC16F877 chip clearly shows constant volts per hertz and converter output voltage.},
        keywords = {Ac/Ac converter, proposed nine-switch converter, volts per hertz control},
        month = {},
        }

Cite This Article

  • ISSN: 2349-6002
  • Volume: 4
  • Issue: 5
  • PageNo: 18-23

Proposed Nine-Switch Ac/Ac Converter Fed Three Phase Induction Motor with Volts per Hertz Control

Related Articles