• ISSN: 2349-6002
  • UGC Approved Journal No 47859

Underground Cable Fault Detection Using IOT

  • Unique Paper ID: 155312
  • Volume: 9
  • Issue: 1
  • PageNo: 567-569
  • Abstract:
  • The target of this venture is to decide the distance of underground link shortcoming from base station in kms. The underground link framework is a typical practice continued in numerous metropolitan areas. While an issue happens for some reason, at that time the fixing system connected with that specific link is troublesome because of not knowing the specific area of the link fault. The project utilizes the standard idea of Ohms regulation i.e., when a low DC voltage is applied at the feeder end through a series resistor (Cable lines), then current would shift relying on the area of shortcoming in the link. In the event that there is a short out (Line to Ground), the voltage across series resistors changes as needs be, which is then taken care of to an ADC to foster exact computerized information which the modified microcontroller would show in kilometers. The issue happening at a specific distance and the particular stage is shown on a LCD communicated to the microcontroller. Further this task can be improved by involving capacitor in an air conditioner circuit to quantify the impedance which could actually find the open circuited link, dissimilar to the short circuited issue just involving resistors in DC circuit.

Cite This Article

  • ISSN: 2349-6002
  • Volume: 9
  • Issue: 1
  • PageNo: 567-569

Underground Cable Fault Detection Using IOT

Related Articles