Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{156024,
        author = {Salman Darzi and Sufiyan Chaudhry and Hrishikesh Kolhe and Chirag Hiwarkar},
        title = {Design and Fabrication of Pneumatic Vice},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {9},
        number = {2},
        pages = {512-515},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=156024},
        abstract = {A vice is a mechanical screw apparatus used for holding or clamping a work piece to allow work to be performed on it with tools such as saws, planes, drills, mills, screwdrivers, sandpaper, etc. Vices usually have one fixed jaw and another parallel jaw which is moved towards or away from the fixed jaw by the screw. Vice is used to drill a wood, metal, etc. by holding your workpiece tightly, it gives you all stability you need so you can make precise cuts. Even it is used for sawing a job with constant force applied by hand, or automatically, in order to cut desired shapes. A pneumatic system is controlled through manual or automatic process. In this Automatic pneumatic vice project for metal working is provided with widely and quick movable clamping jaw and fixed jaw where the vertical clamping surface of the fixed jaw and the horizontal surface of the fastening plane for the working piece confirm an accurate and unchangeable. Using automatically operated pneumatic vice will help you to get the work down easily and save energy.},
        keywords = {Pneumatic, Actuators, Compressor, Bench Vice, Pneumatic Vice},
        month = {},
        }