Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{165194,
        author = {Sandeep S Raut and Rohit Mehta and Nikita Laxman Kanse and Harsh Jha},
        title = {DESIGN AND ANALYSIS OF AUTOMATIC  PNEUMATIC BUMPER},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {11},
        number = {1},
        pages = {96-104},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=165194},
        abstract = {The technology of pneumatic has gained tremendous importance in the field of workplace rationalization and automation from old-fashioned timber works and coal mines to modern machine shops and space robots. It is therefore important that technicians and engineers should have a good knowledge of pneumatic system, air operated valves and accessories. The aim is to design and develop a control system sensor based Pneumatic controlled automotive bumper activation system is called “AUTOMATIC PNEUMATIC BUMPER”. This system is consisting of IR transmitter and Receiver circuit, Control Unit, Pneumatic bumper system. The IR sensor is used to detect the obstacle. There is any obstacle closer to the vehicle (within 4 feet), the control signal is given to the bumper activation system.
In this system controlling is done by IR sensor with the help of IR sensor pneumatic bumper actuate. When the obstacle comes in front of sensor the IR sensor sense and it will actuate the solenoid valve which having a two output and one input. Input is connected from compressor and the output is connected to the pneumatic cylinder by which the bumper will go further and comes back by the compressed gas. The obstacle comes in front of the car the IR unit sensor will command to the control unit.  In this project we overcome the accident problem by means of providing the sensor arrangements in bumper. The aim is to design and develop a control system based on intelligent electronically controlled automotive bumper activation system is called automatic pneumatic bumper.
},
        keywords = {Ultrasonic sensor, pneumatic bumper, IR Sensors, Control unit.},
        month = {},
        }