Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{144351,
        author = {Manikandan G and Manivel M and Karthick raja D and Gunasekaran P},
        title = {DESIGN AND FABRICATION OF NON DUST PAPER WOOD CUTTER},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {3},
        number = {10},
        pages = {256-261},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=144351},
        abstract = {Our project work is design and  fabrication of  non  dust paper wood cutter can be used for cutting the wood by using the chart paper. Generally the paper has less stiffness, which attaches with high speed motor,the stiffness will be increased, and the respective action will be useful for cut woodpieces, lore amount of heat producing on the edge of the paper when cutting thewood pieces. We have seen hacksaw, chisels, metal cutter, for cutting the wood on that we have different cutter used for cutting, for cutting of maximum thickness 35mm. we use chart paper as a cutter of various thickness for cutting the wood. And we have an analysis for cutting the wood different thickness by increasing the thickness.},
        keywords = {Analysis wood  cutter with paper thickness, cutting the wood different thickness.},
        month = {},
        }