Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{144910,
        author = {B.Srinivasulu and Dr.Namish Mehta and Ch.Ranga Rao and Dr.Kancha Sammaiah},
        title = {Copper alloys joining by using EN31  circular thread profile tool through Friction Stir Spot Welding Process},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {6},
        pages = {93-95},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=144910},
        abstract = {Friction stir spot welding(FSSW) is a latest , solid –state fusion course. Tool pin with  properties  use for welding. The revolving tool generate friction heat in the specimen.Then,heated and hardend objects by plunging , a solid-state bond is made connecting the surface of the upper and lower sheet.  From the experiment ,it was studied that for harder matter with harder tool .The pin tool ,revolving at a constant rate, plunges into C11000 specimens,2mm thickness, in spot-joint configuration. EN31 circular  thread  tool  plunge pin depths of despair from 3.5 mm were examined and test by breaking load  of friction stir spot weldment joints of like metal use in the learn.},
        keywords = {friction stir spot welding, copper plates (C11000) 100*55*2mm, EN31 tool of circular thread pin profile.},
        month = {},
        }