Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{146473,
        author = {AMIT ANANTA ATHAWALE and VAIBHAV BANKAR},
        title = {DESIGN AND ANALYSIS OF NEWLY SHAPED BOTTLE FLIP COVER},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {12},
        pages = {700-703},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=146473},
        abstract = {One of the most common methods of converting plastics from the raw material form to an article of use is the process of Injection moulding. This process is most typically used for thermoplastic materials which may be successively melted, reshaped and cooled. Injection moulded components are a feature of almost every functional manufactured article in the modern world. This versatile process allows us to produce high quality, simple or complex components on a fully automated basis at high speed with materials that have changed the face of manufacturing technology over the last 50 years or so. In this paper, the bottle flip cap was designed by doing some modification in it and due to this it will be beneficial for further use and commercial use also. The shape of previous used bottle cap was modified to another shape and due to this aesthetic view, the material requirement get reduced as compared to the previous one or existing one component.  The single thread cap was replaced with multithread cap to make it easy fastening with bottle to save time. For making of bottle flip cap moulding technique or process was used and after that the mould flow analysis of the component was also observed by using solid work  software.  The strength of bottle flip cap was also analysed by using software as well as creating design of the component using solid work  software .},
        keywords = {Moulds, multithread, solidwork, flip cap, aesthetic, etc},
        month = {},
        }