Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{160155,
        author = {Sampada Gaikwad and Prerana Gutte and Jatin Jadhav and Arpita Adhav and D.W.Gawatre},
        title = {Design of double stage flyover with different types of load and problems occur in design with SAP2000},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {10},
        number = {1},
        pages = {9-17},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=160155},
        abstract = {the principle objective of this project is to design and analysis Six lane flyover using SAP2000. The flyover is of 15m length with width of 15.5m. The diameter of the pier is about 2.5m and the Beams are of I-section. The height of the columns is 4.2m .The Flyover has a road width of 15.5m (6lanes), in which 0.5m is of median. It also consists of footpath of 2m width. In the post processing mode after completion of the design we have worked on the structure and studied the bending moment and shear force values.},
        keywords = {Fly over, design parameters, bending moment shear force, post processing, SAP2000},
        month = {},
        }