Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{178446,
        author = {Hitesh Dasriya and Anil Kohle and Sangharsh Undirwade and Rakesh Hatzade and Diksha Harle and Harshad Kubade},
        title = {DESIGN AND IMPLEMENTATION OF SCADA SYSTEM FOR MICRO INDUSTRIES},
        journal = {International Journal of Innovative Research in Technology},
        year = {2025},
        volume = {11},
        number = {12},
        pages = {3496-3500},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=178446},
        abstract = {The main thing of the design is to install a SCADA system for wireless real- time data accession operation. We need to cover all the processes and control the affecting factors since colorful processes are carried out at the same time in large diligence. We can achieve the thing by installing a technology like Wireless SCADA. Microcontroller AT89S52 is connived with temperature detectors. The microcontroller transmits the data continuously wirelessly from the detectors, which is entered at an original USB type trans- receiver with a PC or laptop. The PC software installed saves the information in the database and presents it on the frontal panel of the PC or laptop. The SCADA screen will allow us to change parameters like set point, lower limit, and upper limit. The microprocessor turns on the corresponding relay the moment a detector temperature goes below the specified position. Field bias which are logically connected through relay connections are switched OFF from ON in comparison to their detectors. High and low limits(settings) can be performed so that an alarm is touched off on the PC in case of system failure. SCADA can be used not only at points of exposure but with accurate and safe controlling as well. We can acclimate the parameters and set points on the SCADA screen.},
        keywords = {SCADA, Microcontroller, Temperature sensor},
        month = {May},
        }