Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{183695,
        author = {Dr T. P. Singh and Umesh Chandra Yadav},
        title = {Performance of Pre-Fabricated HDPE Biogas Plant in Continuous Feed Mode for Hilly Region},
        journal = {International Journal of Innovative Research in Technology},
        year = {2025},
        volume = {12},
        number = {3},
        pages = {2945-2951},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=183695},
        abstract = {A study was conducted to evaluate the performance of a pre-fabricated biogas plant (2 cub.m) made up of high-density polyethene to observe its suitability for hill region of Uttarakhand. The mean monthly ambient temperature was between 12.53 and 31.950C during the study period. The ambient temperature was found to affect the slurry temperature inside the bio-gas digester and hence quantity of biogas production. Slurry temperature was higher in the center of the digester compared to the same near the digester wall. The average slurry temperature was higher than the ambient temperature. The average monthly and daily biogas production was lowest (0.57 m3) during winter months with monthly average ambient temperature of 12.530C. However, during remaining period of study, the biogas production was higher ranging from 0.810 to1.203 m3 when ambient temperature ranged between 15.12 and 31.950C. Other process parameters were observed within the permissible limits.},
        keywords = {Biogas plant, digester, high-density polyethylene, slurry temperature, total solid, pre-fabricated, ambient temperature},
        month = {August},
        }