ANALYSIS AND DESIGN OF SEWAGE TREATMENT PLANT: A CASE STUDY ON ST.ANN`S COLLEGE OF ENGINEERING AND TECHNOLOGY, AUTONOMOUS

  • Unique Paper ID: 198626
  • Volume: 12
  • Issue: 11
  • PageNo: 10889-10894
  • Abstract:
  • A Study has been conducted to carry out analysis and design of sewage treatment plant in SACET Campus as a part of our final year project work. The steady increase of population in campus results in the increase of sewage generation. So, it has been proposed to construct a sewage treatment plant with sufficient capacity to treat the increased sewage for next 30 years. The project deals with design of sewage treatment plant and its major components such as screening chamber, Grit chamber, skimming tank, sedimentation tank, and sludge drying beds. It is recommended that the treated water may be supplied for gardening and the remaining sludge after treatment can be used as manure. The use of treated Water will reduce the ground water use. By the execution of project, the entire sewage of the campus can be treated effectively and efficiently for next 30 years.

Copyright & License

Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

BibTeX

@article{198626,
        author = {Dr. T. Kiran Kumar and Ch. Sravanthi and Sk.Mabu Subhani and Sd. Althaf and Sk.Subhan Baji},
        title = {ANALYSIS AND DESIGN OF SEWAGE TREATMENT PLANT: A CASE STUDY ON ST.ANN`S COLLEGE OF ENGINEERING AND TECHNOLOGY, AUTONOMOUS},
        journal = {International Journal of Innovative Research in Technology},
        year = {2026},
        volume = {12},
        number = {11},
        pages = {10889-10894},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=198626},
        abstract = {A Study has been conducted to carry out analysis and design of sewage treatment plant in SACET Campus as a part of our final year project work. The steady increase of population in campus results in the increase of sewage generation. So, it has been proposed to construct a sewage treatment plant with sufficient capacity to treat the increased sewage for next 30 years. The project deals with design of sewage treatment plant and its major components such as screening chamber, Grit chamber, skimming tank, sedimentation tank, and sludge drying beds. It is recommended that the treated water may be supplied for gardening and the remaining sludge after treatment can be used as manure. The use of treated Water will reduce the ground water use. By the execution of project, the entire sewage of the campus can be treated effectively and efficiently for next 30 years.},
        keywords = {Sewage Treatment Plant, Wastewater Design, Campus Water Demand, Population Projection, MLD Calculation, Sustainable Sanitation, Institutional Infrastructure, Environmental Engineering, Water Management.},
        month = {April},
        }

Cite This Article

Kumar, D. T. K., & Sravanthi, C., & Subhani, S., & Althaf, S., & Baji, S. (2026). ANALYSIS AND DESIGN OF SEWAGE TREATMENT PLANT: A CASE STUDY ON ST.ANN`S COLLEGE OF ENGINEERING AND TECHNOLOGY, AUTONOMOUS. International Journal of Innovative Research in Technology (IJIRT), 12(11), 10889–10894.

Related Articles