Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
@article{211141,
author = {Mr. Krishna Raj Singh and Mr. Rahul. R. Kulkarni and Mr. Pranay A. Makasare and Mr. Laxman V. Kamble},
title = {DESIGN AND ANALYSIS OF STEERING SYSTEM ROD FOR LIGHT MOTOR VEHICLE},
journal = {International Journal of Innovative Research in Technology},
year = {2026},
volume = {13},
number = {6},
pages = {3768-3774},
issn = {2349-6002},
url = {https://ijirt.org/article?manuscript=211141},
abstract = {Rack and pinion steering uses a gear-set to convert the circular motion of the steering wheel into the linear motion required to turn the wheels. It also provides a gear reduction, so turning the wheels is easier. It works by enclosing the rack and pinion gear-set in a metal tube, with each end of the rack sticking out from the tube and connected to an axial rod. The pinion gear is attached to the steering shaft so that when the steering wheel is turned, the gear spins, moving the rack. The axial rod at each end of the rack connects to the tie rod end, which is attached to the spindle. Steering system undergo 3 loading condition normal force at z direction, tractive force (Rolling resistance moment) at y direction, lateral force (Overturning moment) at x direction. So, material use for rack rod is need to good in strength and durability with more fatigue life. Three-dimensional CAD model is designed using CATIA V5R20. Finite Element Analysis (FEA)software ANSYS Version 19.0 is used to determine the total deformation and equivalent stresses. Experimental investigation will be done by strain gauge technique and UTM. Comparative analysis of FEA and Experimental will be done for validation of work. Conclusion and future scope will be suggested.},
keywords = {Steering rack rod, ANSYS, gauge technique and UTM.},
month = {November},
}
Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.
Join NowNational Conference on Sustainable Engineering and Management - 2024 Last Date: 15th March 2024
Submit inquiry