Paddy Harvesting System Using Vacuum Inhalation Mechanism

Dr.S.Saravanan; G Praveenkumar; S Prasanth; V Sridhar; S Saranraj

Paddy Harvesting System Using Vacuum Inhalation Mechanism

Authors: Dr.S.Saravanan, G Praveenkumar, S Prasanth, V Sridhar, S Saranraj

Unique Paper ID: 149256
Volume: 6
Issue: 11
PageNo: 454-459

Keywords: Arduino Battery Relay Bluetooth Module DC Motor Vacuum pump

Abstract:
This project is used to collect the paddies which are fallen in the land While harvest by the machine. The paddy and hull are fall down into the cropping field after then using the inhalation process to remove the fallen paddies in the cropping land. The collected hull and paddies are taken by the help of vacuum pipes. The collected hull is not used as food but it is used to rice bran for the cattle. Now a dayâ€™s harvester machine is used to cultivate the paddies were minimum number of the paddies were dropped from the machine. Because of the process many people face difficulties to collect the paddies from the ground and most of the time was wasted for this processes. During the cultivation processes the most of the paddies has been fallen through air and vibration of the harvesting machine. The paddies have been dropped in the field about 10% of the paddies has been wasted from this processes. Hull also wasted during this processes.

Download article

email to a friend

Cite This Article

ISSN: 2349-6002
Volume: 6
Issue: 11
PageNo: 454-459

Paddy Harvesting System Using Vacuum Inhalation Mechanism

Available:https://ijirt.org/Article?manuscript=149256

09 May, 2020

Implementation of Solar Based Intelligent Street Light Control System using IoT

09 May, 2020

Implementation of Smart Water Level Monitoring System for Residential Apartments using IOT

09 May, 2020

Intelligent Transport Monitoring System for Educational Institutions using IoT

26 Apr, 2020

Implementation of IoT Based Poultry Feeder Box

26 Apr, 2020

Soldier Health and Position Tracking System

24 Apr, 2020

Implementation of Solar Powered Intelligent Grass Cutter

24 Apr, 2020

Design and Implementation of IoT Based Smart Trolley for Supermarket

22 Apr, 2020

Design of Low Power 2-D Discrete Wavelet Transform using Hybrid Encoded Booth Multiplier

18 Apr, 2020

Design and Implementation of Automatic Low Cost Organic Fertilizer and Insecticides Making Machine

17 Apr, 2020

Analysis of Voltage Regulation in SEPIC Converter Based Hybrid Solar and Wind Energy System

Impact Factor
8.01 (Year 2024)

UGC Approved
Journal no 47859

Join Our IPN

IJIRT Partner Network

Submit your research paper and those of your network (friends, colleagues, or peers) through your IPN account, and receive 800 INR for each paper that gets published.

Join Now