Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{187811,
        author = {V.Sandhya and M.Nagaphani Sastry and K.Hema Chandra Reddy},
        title = {Study of Process Parameters on the Mechanical Properties of Electron Beam Welded Joints},
        journal = {International Journal of Innovative Research in Technology},
        year = {2025},
        volume = {12},
        number = {6},
        pages = {6531-6537},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=187811},
        abstract = {This study investigates the influence of electron beam welding (EBW) process parameters on the mechanical properties of Ti6Al4V alloy joints through comprehensive experimental design and statistical analysis. Three critical welding parameters voltage (kV), current (mA), and speed (m/min) were systematically varied across three levels using Taguchi L9 orthogonal array design, and their effects on depth of penetration, bead width, hardness, ultimate tensile strength were evaluated. The results demonstrate that current is the most dominant factor across most responses, while voltage significantly influences and speed shows minimal to marginal effects on most properties.},
        keywords = {Electron Beam Welding, Voltage, Current, Speed},
        month = {November},
        }