Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{205962,
        author = {J BANUCHANDAR and C.SRIDEVI},
        title = {PARTIAL REPLACEMENT OF CEMENT BY MARBLEPOWDER AND RIVER SAND BY QUARRY DUST AND LIME STONE WASTE POWDER},
        journal = {International Journal of Innovative Research in Technology},
        year = {2026},
        volume = {13},
        number = {1},
        pages = {9029-9039},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=205962},
        abstract = {This research focuses on concrete mix design using marble powder, quarry dust and lime stone waste powder. The disposal of marble powder from the marble industry is of environmental problem today. Then they used for replacement process M25 grade concrete. The partial replacement of 5%, 10%, 20%, 25% and 30% are used in marble powder and quarry dust increases for workability reduce. The physical property of marble powder, quarry dust and lime stone waste powder is specific gravity, water absorption, silt content and fineness modulus were measured using standard tests. This was followed by compression, split tensile and bending tests on cubes and cylinders to study the strength of concrete made of marble powder, quarry dust and limestone waste powder. The results were compared with the conventional concrete. The results showed that with increasing proportion of quarry dust, marble powder and limestone waste powder.},
        keywords = {Compressive strength test, Split tensile strength test, Flexural strength test},
        month = {June},
        }