Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{145325,
        author = {Rohit V. Bhuskade and M.T. Shete},
        title = {Effect of Difference Electrode Materials in Electrical Discharge Machining of Tungsten Carbide � A Review   },
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {9},
        pages = {471-477},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=145325},
        abstract = {EDM process has become one of the most important and widely accepted production technologies in manufacturing. The principle of Electrical Discharge Machining (EDM ) also called electro discharge spark erosion machining, is based on the erosion of metals by sparks discharges. Tungsten Carbide is an important tool and die material mainly because of its high hardness, strength, wear resistance and high melting point. Due to its high hardness and strength tungsten carbide is difficult to machining by conventional machining process. EDM has proved specially valuable in the machining of super-tough, complex-shaped materials. },
        keywords = {EDM, performance electrode, tungsten carbide, MRR, EWR},
        month = {},
        }