Copyright © 2026 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{145612,
        author = {M.Mohan and M.Ramakrishnan and S.Selvarasu, C.Manikandan and K.Ramachandran, V.Gowtham},
        title = {Mechanical Characterization of Aluminum 6061 with Silicon Carbide Composite},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {4},
        number = {10},
        pages = {613-616},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=145612},
        abstract = {The present work aims to develop Aluminum metal matrix composites by incorporating of reinforcements such that combination of best properties could be achieved. The metal base was selected was Aluminum 6061 and it is reinforced with varying volume percentage of Silicon carbide. These AMC were developed by using crucible casting technique in which predetermined reinforcement is added to the molten matrix is stirred well to obtain desired castings. The Rockwell hardness revealed that composite with 80 % AL & 20 % Sic shows highest hardness value and 90 % AL & 10 % Sic shows Impact strength-16 Joules/mm2 and tensile strength -91.08 N/mm2. Highly reinforced composites show higher variations due to the agglomeration of particles but impact strength were slightly affect due to hardness.},
        keywords = {Mechanical Properties, AL6061, Sic. },
        month = {},
        }