Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{148241,
        author = {Mr.B.DEEBAN and S.Sanoy and Pooja Ramachandran, and V Sarumathi, and A Lingeswar},
        title = {Fillers	on		Mechanical	Properties	and Fracture	Toughness	of		Glass	Fabric `Reinforced Epoxy Composites},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {6},
        number = {1},
        pages = {32-35},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=148241},
        abstract = {Glass fabric reinforced epoxy this composite were filled with two types of fillers namely graphite, silicon carbide (each 15 and 20 weight) this composite was fabricated by hand lay-up method and compressed using hot press process. These composites were checked for their mechanical properties such as tensile, compression testings and impact strength as well as fracture toughness as per ASTM standards. Experimental results on mechanical properties indicate that the strength and the modulus in tensile and flexural mode. Selected failed samples under tensile, bending and fracture were tested. This application can be used in landing gear.

},
        keywords = {G-E	Composite, Fillers, Mechanical Properties, Fracture Toughness},
        month = {},
        }