Experimental Study and Analysis of Vapour Compression Refrigeration System Using (R134A-Cu nano particles) Mixture as a Nano-Refrigerant.

  • Unique Paper ID: 150633
  • Volume: 7
  • Issue: 8
  • PageNo: 129-133
  • Abstract:
  • The performance of the Refrigeration system mostly depends upon the heat transfer capacity of the refrigerant. The most common used refrigerants are R22, R134A, R22, R600 etc. for these refrigerants the heat transfer capacity is not quite good and hence to overcome these limitations and to increase the heat capacity of the refrigerant we have tried to use nano particles as a additive in base refrigerant. In this experimental analysis we have used mixture of copper nano-particles and R-134A as a nano-refrigerant. The addition of nano particles results in improvement of heat capacity of refrigerant and thus various performance parameters such as Refrigeration effect and coefficient of performance of the system also improves by some factor. The experimental studies indicate that the refrigeration system with nano-refrigerant works normally.

Copyright & License

Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

BibTeX

@article{150633,
        author = {Avinash singh},
        title = {Experimental Study and Analysis of Vapour Compression Refrigeration System Using (R134A-Cu nano particles) Mixture as a Nano-Refrigerant.},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {7},
        number = {8},
        pages = {129-133},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=150633},
        abstract = {The performance of the Refrigeration system mostly depends upon the heat transfer capacity of the refrigerant. The most common used refrigerants are R22, R134A, R22, R600 etc. for these refrigerants the heat transfer capacity is not quite good and hence to overcome these limitations and to increase the heat capacity of the refrigerant we have tried to use nano particles as a additive in base refrigerant. In this experimental analysis we have used mixture of copper nano-particles and R-134A as a nano-refrigerant. The  addition of nano particles results in improvement of heat capacity of refrigerant and thus various performance parameters such as Refrigeration effect and coefficient of performance of the system also improves by some factor.  The experimental studies indicate that the refrigeration system with nano-refrigerant works normally.},
        keywords = {},
        month = {},
        }

Related Articles