Copyright © 2025 Authors retain the copyright of this article. This article is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

@article{155331,
        author = {V.Jayanth Reddy and D.Shiva Rakesh and D SRIKANTH},
        title = {IOT BASED FIRE AND GAS DETECTION},
        journal = {International Journal of Innovative Research in Technology},
        year = {},
        volume = {9},
        number = {1},
        pages = {891-895},
        issn = {2349-6002},
        url = {https://ijirt.org/article?manuscript=155331},
        abstract = {Fire Detectors play a very important role in Industries, Shops, Malls, Residential complexes, parking areas, etc. They help in detecting fire or smoke at an early stage and can help in saving lives. Commercial Fire detecting systems usually have an alarm signaling, with the help of a buzzer or Siren. We have designed an IOT based Fire Alerting System using Temperature and a smoke sensor which would not only signal the presence of fire in a particular premise but will also send related information through IOT.
Internet of Things (IoT) is basically the network of ‘things’ by which physical things can exchange data with the help of sensors, electronics, software, and connectivity. These systems do not require any human interaction. In this Arduino fire alarm system using temperature and smoke sensor using the IOT project, we can send LIVE information like Temperature, Smoke Value detected by a particular device to the Fire Department.
                   This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Full wave bridge rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.},
        keywords = {},
        month = {},
        }